Revo REVDPTZ22-2 Bedienerhandbuch PDF herunterladen (Seite 37)

• ORIGIN OFFSET

OFFSET SETUP

(CTRL KEY)

PAN OFFSET : 000.0

TILT OFFSET : 000.0

ENABLE : OFF

SAVE AND EXIT(ESC TO CANCEL)

This feature is useful to align a new dome camera exactly the same as the previously installed

dome camera.

Dome camera’s origin set and all data initialize option do not override offset values. Only the

default set option in this menu will set the offset value to zero. This can be used to avoid ceiling

obstructions.

• DOME RESET

DOME RESET

ARE YOU SURE ?

CANCEL

This feature is used to re-calibrate the orientation of a selected dome camera. Origin offset value

is not affected by this function. (Offset is still valid after origin set)

• SYSTEM MENU

SYSTEM MENU

MOTOR SETUP

PASSWORD EDIT

ORIGIN CHECK

CALIBRATION : ON

PASSWORD ENABLE : OFF

MENU TIME OUT : OFF

BLINK CURSOR : ON

DOME ANSWER : ON

SAVE AND EXIT(ESC TO CANCEL)

CALIBRATION : ON(Auto origin check) / OFF

PASSWORD ENABLE : ON(requires the password to enter menu) / OFF

MENU TIME OUT : ON(5mintues) / OFF(always menu display)

BLINK CURSOR : ON / OFF(no blinking cursor)

DOME ANSWER : ON / OFF(no acknowledge command from the dome)

This option is helpful to escape the collision of the command using some DVR.

MOTOR SETUP

Motor Setup menu provides the pan and tilt speed of a camera. User can set the desired

speed with pushing the Joystick to the left or right. During operation, pressing 153 + ON keys

will change the speed to the SLOW mode and pressing 153 + OFF keys will change the speed

to the Normal mode.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 47 48

Keine Kommentare

Revo REVDPTZ22-2 Bedienerhandbuch Seite 37